Tips for miniature bearing heating

• the yoke placed  on the end face of the host .

• insert the plug into a power socket with switches.

• check the grounding wire, after the power is switched on with the test pencil test.

• press the start button, the main power switch.

• check the yoke to ground shall be voltage free.

• press the stop button to stop the host power, heating.

• according to the linear ball bearing with different specifications or other workpiece, choosing different sets of the yoke, the yoke on the top surface of the host,  should be smooth.

• heating high speed bearings , the sensor should be inserted into the Sensor Socket, and will be close to the workpiece is heated sensor.