miniature ball bearings Make two groups to purpose

Make two groups to purpose, is the deviation compensation can be considered, the rotating precision bearings on both ends of the respective even increased, and the bearing seat hole and both ends of the trunnion coaxiality error are partially eliminated. The mating surface to surface  miniature ball bearings strengthening measures, such as sandblasting, precision plunger diameter slightly larger plug a hole, are beneficial to improve matching precision. Large and outer bearing surplus volume, in order to convenient installation, there also will be the outer circle and the bearing seat hole is made with a small taper, the installation on two square taper fit, and cover with control outer  slewing bearing ‍ ‍advance amount, the amount of interference in the predetermined range, while the end cover end face friction resistance of the outer end face also contribute to the fixed ring, to prevent the occurrence of peristalsis. This installation method is particularly convenient for bearing the vertical installation.

According to the load direction, acting on the cross roller bearing inner ring and the outer ring of the nature and which side of the ferrule is rotating, the load can be divided into the rotating load, static load or non directional load. Under the rotating load and non directional loads shall be taken with the (static ring interference fit), static load bearing ferrule, desirable transition fit or movable fit (clearance). The bearing load

Large or withstand the impact load, vibration, the interference must be increased. The hollow shaft, thin-wall bearing box or light alloy, plastic housings, also need to  high speed bearing ‍increase the amount of interference. The requirement to maintain high rotation, should be used in high precision bearings, and improve the dimensional precision of shaft and bearing box, to avoid interference is too large. If the interference is too large, may make the geometry precision bearing shaft or bearing box

Geometry, to the detriment of the rotating precision bearings.                                                                                                   ‍

miniature ball bearings Irregular noise

Reason 1: the clearance is too large, countermeasures: research cooperation and bearing clearance, modify the pre load.

Reason 2: foreign intrusion, countermeasures: a study of replacement of bearings, wash the parts, improve sealing device, the use of clean lubricant.

Reason 3: spherical injury, peeling, countermeasures: replacement of bearings.

Abnormal temperature rise

Reason 1: excessive lubricant, miniature ball bearings‍ countermeasures: reducing lubricant grease, proper use, select the hard.

2 reasons: lack of lubricant or not suitable, countermeasures: add lubricant, select the appropriate lubricant.

Reason 3: abnormal load, countermeasures: modify the coordination, clearance of bearing pre load, adjust, modify the shoulder position of the shell.

Reason 4: poor installation, countermeasures: improve machining precision, and shell axis installation accuracy, installation method.

Reason 5: surface slewing bearing‍ creep, seal friction is too large, countermeasures: replacement of bearings, study, modify the shaft and housing, changes the sealing form.

Vibration (axial runout)

Reasons: (1 Steel Carburized) surface deformation, countermeasures: Note bearing replacement operation.

Reason 2: peel, countermeasures: replacement of bearings.

Reason 3: poor installation, reali slim bearings‍ countermeasures: axis, shell shoulder pad angle, side angle.

Reason 4: foreign intrusion, countermeasures: replacement of bearings, cleaning parts, improved sealing device.

Lubricant leakage is overmuch, discoloration

Cause: excessive lubricant, foreign intrusion, wear powder foreign body, countermeasures: proper use of lubricant, change the selection of lubricant, the replacement of bearings, cleaning shell.                                                                                        ‍

high speed bearing by rolling vibration

When the operation of the bearing under a radial load, its internal only a plurality of rolling load, due to the ferrule elastic contact constitute the "spring" supporting the rolling body in the radial load line generates periodic oscillation, and the shaft center will therefore vertically moving or moving high speed bearing‍ horizontally, and causes noise. This kind of vibration is called rolling through the vibration, especially in low speed when the more obvious.

And the amplitude is related to bearing type, radial load, radial clearance and ball number. Usually the smaller amplitude, if the amplitude is large when the harm, this is often the minish preload appropriate axial clearance or to reduce.

Effect of temperature on bearing life

Bearing in the work, its size may be changed by changing the structure of the material. This transformation was affected by temperature, time and conical bearing worm gear speed reducer‍ stress.

In order to avoid the dimensional change not allowed due to changes in material structure in the work, bearing materials must go through a special heat treatment.

According to the different types of bearings, bearing in standard hardenability and induction quenching heat treatment of steel, the recommended maximum working Double Row Ball Slewing Bearing‍ temperature is between 120 to 200 degrees. There is a direct relationship between the maximum operating temperature and the heat treatment process can be achieved. If the normal working temperature higher than the highest temperature of some application suggestions, bearing should choose stable series high. If the bearing of continuous working in high temperature, load capacity of the bearing may need to make adjustments.

‍

LYHY flanged ball bearing eliminate cage sound

Influence of bearing structure on the vibration and noise.

The 4 holder of sound

Keep the free vibration of frame and the rolling body or ring phase impact will send this noise in the bearings rotate process. It may appear in all kinds of bearing, but its sound pressure level is not too high and the low frequency. Its characteristic is:

A. stamping cage and plastic holder can be generated.

B. either oil or grease will appear.

C. when the outer ring bearing the bending moment is most likely to occur.

D. radial clearance large easily.

Because the cage pocket clearance and the holder and the ring gap is inevitable in bearing product to exist, thus completely eliminate cage sound is very difficult, but can reduce the assembly error, gap optimum and cage movement to improve.

Another cage special sound is due to the holder and the other bearing parts leading between the rubbing surfaces caused maintain self-excited vibration and noise frame. flanged ball bearing‍ Stamping of deep groove ball bearing retainer is thin, curved in the radial and axial in-plane stiffness is low, the overall stability is poor, will the bearings rotate at high speed due to bending deformation caused by self-excited vibration, "beep".

When the bearing under a radial load and oil poor performance situation, at the beginning of operation "Kacha, Kacha hear noise", which is mainly due to the rolling body left in the load zone, noise suddenly accelerated and cage collision by rolling, the sound of impact can not be avoided but with wind power bearing‍ running for a period of time will disappear.

To prevent the holder noise measures are as follows:

A. cage revolution motion stability, should as far as possible by the ring guide way and pay attention to guide the full lubrication, give the improvement of bearing structure of high speed conditions, the L type roller guide holder is changed to Z type ring rib guide holder.

B. bearings rotate at high speed, bearing slewing bearing‍ pocket clearance of the cage vibration amplitude is much larger than the pocket hole cage vibration amplitude gap is small, so the pocket clearance value is very important.

C. should pay attention to reduce the radial clearance.

D. try to improve manufacturing precision frame maintain, improve the surface quality of the holder, helps to reduce body roll and keep the noise frame collision or friction.

E. actively adopt advanced cleaning technology, cleaning effective parts and the set of products, improving the cleanliness of bearing.‍

miniature ball bearing Scope of application

Why do so many industries need to needle roller bearings?

Needle roller bearings are widely used at present market is very hot, and in this process, the field of machine tools use some relatively wide.

Scope of application: this bearing needle roller bearings are used for gearbox, motorcycle, automobile, the small end of connecting rod. Gear. Because the cylinder temperature miniature ball bearings‍ reducer, increase, so the bearing high temperature. With thin and long needle bearing roller (roller length is 3~10 times the diameter, the diameter is generally not more than 5mm), so the radial structure is compact, its diameter size and load capacity compared with other types of bearings at the same time, miniature ball bearing, especially for radial installation support results in limited size. According to the use of different occasions, can be used without inner ring bearings high speed bearing‍ or needle roller and cage assemblies, the shaft neck surface and the surface of shell holes matched with a bearing directly as bearing inner and outer rolling surface, to guarantee load capacity and operating performance and have the same ring bearing, shaft or housing holes raceway surface hardness, the machining precision and the surface quality of bearing ring raceway and similar.

high speed bearing requirements

The high speed bearing   life and reliability, although the design and bearing manufacturing, lubrication, installation, maintenance and other factors, but the bearing material of high quality and reliability is the key. Rolling bearing components in tensile, compression, bending, shear, alternating with complicated stress state and high stress, high speed and long time work. Therefore, with the rolling bearing:
1) high resistance to plastic deformation capacity,
2) anti friction, wear and high performance,
3) the rotating precision and high dimensional accuracy,
4) good dimension stability,
5) a long service life and high reliability.
For Liner Motion Bearings working under special conditions, there are special requirements, such as high temperature performance, low temperature resistant performance, corrosion resistance and water resistance etc..

The working environment and the performance of the miniature ball bearings

The miniature ball bearings is composed of an inner, outer ring, rolling body (ball, roller or needle roller and cage) is composed of four parts, in addition to maintain the reactor, the rest are composed of bearing steel. When the bearings, bearing inner, outer ring, rolling bearing body bear the high frequency, stress function. Bearing working conditions are very complicated. Load concentration in a small area of the rolling body. Theory for the ball, in a point; and the roller is in a line, and the rolling body and the ring contact area is very small (a point / line contact), so the bearing parts in the work, the rolling body and the ring surface per unit area to bear great pressure in general, up to 1500 - 5000N/mm2; Series radial ball bearings rotation, but also bear the role of centrifugal force, the force increases as the speed increases; a rolling body and a ferrule exists not only rolling, and sliding, so there is friction between the roller and ring. The comprehensive role in the above several stress, fatigue strength of low position on the surface of ring or rolling of the first fatigue crack, finally forms the fatigue spalling, the bearing failure. Bearing normal damage form is the contact fatigue damage, common and plastic deformation, indentation, wear, cracks etc.